cooler master hyper 212 rgb black edition installation intel

Step 15: Connect the cooler plug to your motherboard’s CPU_FAN Socket. Step 14: Now fit the fan to the heat sink as before, just push to fit. Step 13: Put the cooler align to those dual bolts and tight all screw equally with screwdriver. Step 12: Double tight those dual bolts by this tool using the screwdriver as shown in above image. Step 11: Now take out the dual bolts and tight it on every point of the spider like above image. Step 10: Apply a little bit of cooling paste on your CPU, don’t use too much and don’t use less then above image.

Step 9: Now this is important, do not forget to remove the plastic cover from the CPU cooler Before installing. Step 8: It will pop up from the motherboard holes, like the image above. Step 7: Now take out the spider given with cooler and plug it in the back of the mother board align to 4 holes. Step 6: Tight the mounting tool on the other side also, your CPU cooler will look like this. Step 5: Using a screw tight it from the back with the help of 4 head screw driver. Step 4: We have Intel Socket just use this mounting too and put it as shown in above image. Confused which are the right one !! Just Follow next step. Step 3: Now you have these Mounting tools (Nuts, Screws, Gear, and cooling paste). Step 2: First you have to unplug you fan from the heat sink Carefully.

Step 1: You have already installed you CPU on your motherboard, then unbox your CPU cooler. How to Install Cooler Master Hyper 212 LED (CPU Cooler) So, here is How to Install Cooler Master Hyper 212 CPU Cooler. Below are the step by step instructions you have to follow it or you can also watch a video tutorial embed in the bottom or the post.

Cooler master hyper 212 rgb black edition installation intel